Brass fittings and components for fluid system

 

Sub-contracting of brass fittings, accessories and components

 

Processing of brass parts to customers drawings

Production

Theonilde s.a.s. uses different types of brass, such as CW614N, CW617N, CW602N (ADZ).

 

The choice depends on the type of processing to be carried out and the particular characteristics to be obtained. All the materials employed throughout processing are purchased from the best brass suppliers in order to guarantee customers the highest level of product quality.

 

Hot-pressing

Theonilde s.a.s. is situated in a highly industrialised area of Brescia and therefore can avail of excellent and long-lasting working relationships with external presses.


The company, as regards hot-pressing, avails of Hatebur presses for the production of caps in sizes up to 1". For more complex and/or heavy parts, Hydromec presses are used.

 

Advantages of hot-pressing

As compared with casting, hot-pressing offers a higher quality output under several aspects: material integrity, dimensional tolerances and surface finish. At same time, hot pressing is considered more advantageous due to shorter processing times, the recovery of waste, lower manufacturing costs and the increased reliability of the production process.


Thanks to these aspects, forging produces a stronger product with perfectly tight seals, restricted dimensional tolerances and lower overall costs.

    

   Theonilde sas: Hot-pressing - processing of brass parts to customers drawings - click to enlarge

   

Theonilde sas: Hot-pressing - processing of brass parts to customers drawings - click to enlarge

   

Theonilde sas: Hot-pressing - processing of brass parts to customers drawings - click to enlarge

    

Processing on transfer machines

The processing department is made up of various machine tools that differ in type, size and complexity of the part to be processed.


The transfer machines generally process hot pressed products; the automatic transfer machines are used to process brass nuts and fittings, whereas more complex components that require several operations are produced on the manual transfer machines where a greater number of processing units have been installed.

     

Theonilde sas: machining drawings - click to enlarge

   

Theonilde sas: machining drawings - click to enlarge

            

Processing on automatic lathes

Single and multi-spindle lathes as well as CNC lathes are used to obtain components that are processed directly from various types of brass bars.

 

The company's multi-spindle lathes allow a bar passage of 18mm to 90mm.

Whereas the CNC lathes allow a bar passage of 18mm to 70mm.

     

Theonilde sas: processing on automatic lathes - click to enlarge

   

Theonilde sas: processing on automatic lathes - click to enlarge

   

Theonilde sas: processing on automatic lathes - click to enlarge

   

  

 

 

 

Valid XHTML 1.0 Transitional

sito web a norma W3C